-20%

IR Wireless Zephyr Express

$364.00

SKU wireless-zephyr-ir Category Digitrax DCC Systems

The Expanded Zephyr Express is the ONLY starter set with its simplicity, wide variety of advanced features, and a clear positive upgrade path to bigger and better things without obsolescing anything. It is the Absolute Best Entry-Level System and makes a Great Add-on Yard Throttle and Booster for existing Digitrax systems.

For an entry-level system, the Expanded Zephyr Express has many impressive features – practically a mini-Chief. Check out this list of Zephyr features:

The Expanded Zephyr Express Starter Set Includes:

DCS-52 Booster Command Station/Power Booster and Throttle (rated at 3 Amps)
Decoder LT-1 Test Kit
Digitrax UT6 Walk Around Throttle
Digitrax UR-90X IR Receiver
2 Basic Locomotive Decoders (HO DH126D or N-Scale DN135D) your choice.
5′ LocoNet Cable
PS-314 Power Supply (110 Volts or 240 Volts)
Digitrax Decoder Manual
Digitrax Zephyr Express Manual.

Select your Decoder size below ↓

Decoder Size

Clear

Zephyr Express Capabilities:

Color 2.4 LCD Screen.
Large Backlit Keypad.
Command Station, Booster, and Throttle all contained in one “Console” station.
Large Loco control spin-knob throttle
Large Direction knob with Brake position
Two “jump” ports that allow you to use 2 traditional DC analog throttles to control 2 trains
LocoNet (6-wire phone cable and RJ12 jacks) peer-to-peer network for throttles and accessories
Accepts all Digitrax throttles: plug-in & walk-around, Infrared or Radio throttles.
Operate up to 20 throttles (engineers) at one time.
Control up to 20 trains at once
14, 28, and 128 speed steps
Two- and Four-Digit Addressing, selectable with 10-key pad
Analog loco controlled with address “00”
3-amp booster with 13.8-volt (N/HO) output
Additional boosters can be added as needed
Control front and rear lights plus up to 29 other functions with built-in throttle
Mute Key used in conjunction with DCC sound decoders to turn the sound on/off.
Control up to 999 turnouts
Turnout feedback: memory, positive, and exact
Basic, Uni-Versal, and Advanced MU consisting
Separate programming track allows programming in any mode while layout continues to run.
Program all CVs with any required value
Read/Write programming, even in OPS-Mode, if layout is wired with Transponding Receivers
OPS-Mode programming. The Zephyr throttle display will not do OPS-mode read back.
Braking feature that allows you to set and release the brake with a lever on the console..
Use PR-3 interface (s) to connect one or more computers to the system (Sold Seporatly)
Easily upgrades to the Chief without being obsolete
Can be added to any system to be used as a yard throttle with it’s own booster for the yard