Southern Digital

-20%

Scissor Switch Code 55 (SLE383F)

$175.15

SKU sle383f Category

The Peco N-Scale Double Crossover Code 55 rail. Additional power routing control is necessary for smooth transition for either DC or DCC controls. This power transition can be accomplished by either a rotary switch, relays or switch motors with auxiliary contacts. Four Peco PL-10 or PL-10W switch motors with PL-13 switch contacts can be added for remote operation.

Type: Electrofrog Code: 55 Angle: 20 degrees Main Spacing: 1 1/16″

Availability: 1 in stock (can be backordered)

Electrofrog ARE power routing, this means the frog rails will be powered from the point rails (the rails that move).  This will cause a short circuit on your layout when installed in a passing siding for both DC and DCC when the switch at the opposite end of the siding is set for the mainline and the opposite end of the siding is set for the diverging route.  To eliminate this problem use insulated rail joiners on bothe of the frog rails.  The advantage to Electrofrog is with small steam locomotive, because the frog is always powered the small loco’s do not have a tendency to stall on the frog.

Scroll to Top