Electrofrog ARE power routing, this means the frog rails will be powered from the point rails (the rails that move). This will cause a short circuit on your layout when installed in a passing siding for both DC and DCC when the switch at the opposite end of the siding is set for the mainline and the opposite end of the siding is set for the diverging route. To eliminate this problem use insulated rail joiners on bothe of the frog rails. The advantage to Electrofrog is with small steam locomotive, because the frog is always powered the small loco’s do not have a tendency to stall on the frog.
Right Hand Curved Code 100 Electrofrog (SLE86)
SL-E86 This Peco HO-Scale Right Hand Curved Switch Code 100 has power routing. Simply add two PL-10 or PL-10W and switch motor and a set of contacts (PL-13) for remote operation.
Type: Electrofrog Code: 100 Radii 1: 60″ Radii 2: 40″
Availability: 7 in stock (can be backordered)
|Dimensions||11 × 3 × .2 in|