(These items work with most DCC Manufactures systems)
Stationary Decoders
(These units are to control remote switch
machines, remote lighting or any device that needs to be turned on or off
remotley
Stock
#
Description
Item
MSRP
Your
Price
Qty
DS-64
The basic
function of the Digitrax Stationary Decoder (DS-64) is to be able to control 4 individual
Switches machines remotely.
$59.95
$48
DS-44
This is a New
Basic Stationary Decoder. The DS-44 will operate four slow motion switch
machines. Simply hook two wires to the power buss or track and the other
wires to the switch machines. All four switch machine can be
individually address, you no longer are required to have all four
addresses in sequence like the DS-54.
Cost
effective control for a single Kato Unitrack turnout or other similar
device.
$14.95
$12
Hare
Switch decoder for Tortoise switch machines.
The Hare plugs directly onto the Tortoise switch machine edge connector
contacts.
$29.95
$24
Miscelanous DCC Devices
Stock
#
Description
Item
MSRP
Your
Price
Qty
CLOCK
Logic Rail Fast Clock. This
clock interfaces with Digitrax LocoNet®.
$79.95
$68
DTM-30
The
DTM30 Super Tower Master is a 30 channel point, signal & sensor
controller / display unit for automation of layout control panels.
$160
$130
Digitrax Only
(The following items are designed to only work with
Digitrax DCC Systems)
Stock
#
Description
Item
MSRP
Your
Price
Qty
UR-92
Duplex
Radio Receiver New 2.4 GHz Receiver for the new
DT402D Throttle
$160.00
$129.95
UR-91
Radio
Receiver
The UR-91 is a 900 MHz. Radio Receiver
designed especially for Digitrax LocoNetā to be used with either the
DT-300R or DT400R Throttles
$149.95
$120
UR-90
Infrared Receiver
The UR90 is the IR
receiver unit for Digitrax systems with Infrared throttles.
$45.95
$37
UP-5
Remote Plug-In Panel
Universal Panel for remote plug in
locations on your railroad.
$16.95
$15
LT-1
Digitrax Loco-Net
Tester and Decoder Tester
$4.95
$4
LNRP
Digitrax
LocoNet Repeater
$69.99
$59.99
Digitrax Transponding Devices
(The devices below support Digitrax
Transponding. Transponding is a method for locomotive and cars to
transmit their address and location on your railroad back to a computer
via Loco-Net and a Digitrax BDL-168 occupancy detector)